How to Change Combination Locks?

Combination locks provide secure protection and can give you peace of mind that your luggage or valuables are safe. For starters, combination locks are the types of padlocks that use numbers and symbols instead of a key.

There are different types of combinational locks such as the digital, padlock combination, and door lock combination. However, there are factors to consider while trying to change the locking set of each product. You need to consider the type of combination, the manufacturer, model, and much more.

If the lock has a serial number, you can call a dependable locksmith for help. If it doesn't, it will be difficult to reset the combination.

Here are different ways of changing the code of a combination lock.

No matter the type of combination lock you want to reset – digital, padlock, door lock combination, or briefcase, it needs to be in the open position.

Then, follow these steps:

• Be patient with each switch and trial.
• Follow the specific instructions provided by the manufacturer of the lock.
• Make sure the new combination has been installed before locking the lock.
• Use tools that pertain to a particular lock only.
• If in doubt or the process seems technical, consult the services of a professional.

While the above tips are general knowledge about changing the combination lock or code of any type of lock, there are specific guides for both digital and dial locks.

• Procedure for changing the combination of a Dial lock
• Some dial locks come with a key and a button at the back.
• Insert the key and turn it to the left until it stops.
• Return the dial to 0.
• While holding on to the button, move the dial anti-clockwise to 48 or just before 0, then lift your hand from the button.
• Turn the key in its position before removing it.
• Turn the dial until there is a click.
• Then the new set of combinations has successfully replaced the previous set.

However, test if the combination is the desired set, if not, then repeat the process. If the above steps fail, consult the service of a professional locksmith.

Changing the Combination for Digital Locks

Put the lock to programming mode by inputting the previous combination of code and "#".

• After five subsequent beeps, press 1 followed by "*"
• Input the preferred new code before pressing "#" again.
• After three successful beeps press the new code and "#".
• There will be another set of three unique beeps to confirm that the two new codes are the same.

Before locking the safe, kindly confirm if the new code is working as required.

The above description works best on everyday digital locks that are not sophisticated. For institutional buildings like banks and museums, contact a professional locksmith. Yet, in situations where there are limited availability of specialists, make use of the following life-hacks.

Do online research with the brand name of your lock. Input the name of the product and the mode of combination, either numbers or other characters. Look for authoritative information from the manufacturers or a specific guideline that pertains to the lock.

While doing so, try not to jailbreak the lock. Remember, breaking the lock could lead to exposing whatever is behind to more danger.

Contact Locksmith Management

If you have tried all the tips suggested in this article and cannot reset your combinational lock, then you need help from our experts. Call a professional from Locksmith Management and we will send an experienced professional locksmith to your location.